Video Bitrate Calculator (from a File Size Limit)
About this tool
If an upload form says videos must be no larger than 25 MB, what bitrate should you export at? Enter the file size limit and video duration to estimate the average video bitrate after allowing for audio and a safety margin. You do not need to select a video file. All processing happens entirely in your browser (no data is sent).
Enter the export settings
Estimated average video bitrate 1,488 kbps (1.488 Mbps)
Example: submit a two-minute screen recording within 25 MB
A tutorial recording includes narration at 128 kbps. Reserving 3% of 25 MB leaves 24.25 MB available. The 120 seconds of audio use 1.92 MB, leaving 22.33 MB for video.
The average video bitrate is 22.33 MB × 8,000 ÷ 120 seconds, rounded down to 1,488 kbps. Enter this in your export software's average video bitrate or target bitrate setting. If the setting uses Mbps, enter 1.488; if it accepts only steps of 0.1 Mbps, round down to 1.4.
Check the exported file
The calculation uses 1 kbps = 1,000 bits/second. The average video bitrate is a target over the entire video. Encoder behavior and the overhead required by containers such as MP4 affect the final file size. If you are close to the limit, check the actual byte count. If it exceeds the limit, increase the safety margin and calculate again.
If compression makes text in the tutorial unreadable, try cutting the introduction or waiting periods. A shorter video allows more data per second within the same file size. After exporting, estimate the upload time from the file size and upload speed with the File Transfer Time Calculator.
For a video made from interval photographs, enter the playback duration of the finished video as the video duration. For example, 300 photos played at 30 fps produce 10 seconds of video. Before shooting, use the Time-lapse Shooting Calculator to work backwards from the desired playback duration to the photo count and shooting time.