Time-lapse Shooting Calculator (Photo Count and Duration)

About this tool

How many photos should your camera take to create a time-lapse video from still images? Calculate the required photo count from the final video length and frame rate, then use the shooting interval to find the time until the last shutter release. All processing happens entirely in your browser (no data is sent).

Enter your shooting settings

This is the interval between successive shutter releases.
If you save RAW and JPEG together, add the sizes of both files produced by one shot.

Required photo count: 300

Time from the first to the last exposure start: 24 min 55 s

Estimated total size of still images: 1,200 MB (1.2 GB)

Example: turn moving clouds into a 10-second video

Using one photo per video frame, a 10-second video at 30 fps needs 300 photos. At a five-second interval, the first photo starts immediately and the second starts five seconds later. There are 299 intervals before the 300th photo, so a shoot starting at noon begins its final exposure at 12:24:55.

Change only the interval to 10 seconds and the photo count and video length stay the same, but the final exposure starts at 12:49:50. This captures cloud changes over a longer period within the same 10-second video.

Camera and editing software settings

  • Required photos = final video length in seconds × playback fps. Fractions are rounded up to give the minimum count that meets the requested length. Import the image sequence into your editor at the fps specified here.
  • Shooting time = (photo count − 1) × shooting interval. Keep the camera still until the last exposure and file write finish. If your camera defines the interval as the wait from the end of one exposure to the start of the next, add the exposure time to that wait before entering it here.
  • Take a few test shots on location to check that exposure and writing finish before the next shot. One MB is 1,000,000 bytes. JPEG and compressed RAW sizes vary with the scene, so leave spare storage space.

If the finished video must meet a file-size limit, use the video bitrate calculator to estimate export settings from the video duration and size limit.