Ukulele Tuner — Reference Tones & Microphone Pitch Detection
About this tool
Choose high-G standard, low-G, D, or baritone tuning. High-G tuning uses a higher-pitched fourth string. Reference A4 defaults to 440 Hz and can be adjusted from 390 to 480 Hz. All processing happens in your browser; no data is sent.
Tap to play a reference tone
Selected reference tone
Detected pitch: —
Difference: —
Waiting for microphone input
Play a reference tone or use the microphone to check your pitch.
You can use the microphone while playing a reference tone. Headphones are recommended because the microphone may pick up speaker output. Microphone audio is never played through the speakers.
How to use this tool
- Select a tuning preset and the string to check. Adjust reference A4 if needed. Tap a string or note button to play its reference tone.
- Press “Play reference tone” to hear the pitch, or “Check with microphone” to measure a note you play.
- When using the microphone, use the detected frequency, cent difference, and “In tune / Sharp / Flat” indication to adjust the instrument. Within ±5 cents is considered in tune.
- Press “Reset” to restore the default tuning and A4 = 440 Hz, stopping both audio and microphone.
Microphone access requires permission in a compatible browser over HTTPS. Background noise, strong harmonics, quiet instruments, and microphone characteristics can affect detection. Lower your device volume before starting reference-tone playback.