Shamisen Tuner — Reference Tones & Microphone Pitch Detection

About this tool

Tune the three strings of a shamisen in honchoshi, niagari, or sansagari. Several reference-pitch examples are available because the tuning center varies with the piece and voice. Reference A4 defaults to 440 Hz and can be adjusted from 390 to 480 Hz. All processing happens in your browser; no data is sent.

Tap to play a reference tone

Selected reference tone

—

Detected pitch: —

Difference: —

Waiting for microphone input

Play a reference tone or use the microphone to check your pitch.

You can use the microphone while playing a reference tone. Headphones are recommended because the microphone may pick up speaker output. Microphone audio is never played through the speakers.

How to use this tool

  1. Select a tuning preset and the string to check. Adjust reference A4 if needed. Tap a string or note button to play its reference tone.
  2. Press “Play reference tone” to hear the pitch, or “Check with microphone” to measure a note you play.
  3. When using the microphone, use the detected frequency, cent difference, and “In tune / Sharp / Flat” indication to adjust the instrument. Within ±5 cents is considered in tune.
  4. Press “Reset” to restore the default tuning and A4 = 440 Hz, stopping both audio and microphone.

Microphone access requires permission in a compatible browser over HTTPS. Background noise, strong harmonics, quiet instruments, and microphone characteristics can affect detection. Lower your device volume before starting reference-tone playback.